10/23 Creating the new panel

We removed all of the instruments from the old panel today so we can use the old panel as a template for the new panel. The curve around the top of the new panel must match the old panel. We are going to try to reuse the old angle from this panel.

The picture below shows the old panel on top of the new panel so the curve can be transferred.

Heres a picture of the new panel with the curve cut and the old angle clecoed onto the new panel. The attach holes for the canopy lock have been match drilled into the new panel as well as the attach holes to mount the panel to the fuselage side panels.

No comments: