11/20 Remote Magnetometer rewiring

Tonight after work I squirmed back into the fuselage and took the D sub 9 pin remote magnetometer connector apart. The 2 wires from the outside air temperature (OAT) probe have been put into the wrong holes as I counted from the wrong side. Using the D sub extraction tool, I removed them and reinserted them into the correct holes. Dynon supplied a plastic D sub extraction tool with the wiring harness which I thought wouldnt work as well as my metal ones, but it seemed to work ok. I dont think it would hold up to repeated use though.



















Here is what the connector looks like almost reassembled.