Left Elevator... 5th day

Drilled hole in spar for the 5 wires that go to the electric trim motor and put in a plastic grommet.








Drilled and cleoced the piano hinge that holds the trim tab. Plans call for AN257-p2, however, the AN257-P3 piano hinge (a little deeper hinge) fit better so that is what I used.






A problem came up in riveting the piano hinge to the spar. The heads on the piano hinge interfer with the squeezer because they are lower than the rivet. If I turned the piano hinge over, it would work fine, but the top of the piano hinge would protrude a little above the elevator. Going to quit for the evening and research how to fix this.